8613564568558

Pre-bored Pre-cast Piling Equipment

Short Description:

The pre-bored precast concrete pile construction method is to use pre-bored pre-cast piling equipment for drilling, deep stirring and expanding the bottom, and finally implanting the pre-cast pile body. It’s a pile foundation method with various combinations of different types of the prestressed high strength concrete knot diversion pile (PHDC), prestressed high-intensity concrete pile (PHC), prestressed reinforced high strength concrete pile (PRHC) under sequence as pilling, Root-enlarging, Injecting, implanting.


  • FOB Price: US $0.5 - 9,999,999 / Piece
  • Min. Order Quantity: 1 Piece/Pieces
  • Supply Ability: 100 Piece/Pieces per Month
  • Port: Shanghai Port
  • Payment Terms: L/C, D/A, D/P, T/T
  • Product Detail

    Product Tags

    Product Main Features:

    1. No soil-squeezing, no vibration, noiseless

    2. Great pile-forming quality, completely controllable of pile top elevation

    3. Strong vertical compression, pull and horizontal load resistance

    4. Low mud discharge

    5. Good social benefit and promotion value

    PRE-BORED PRE-CAST CONCRETE PILE METHOD

    PRE-BORED PRE-CAST CONCRETE IMPLANTED PILE TYPE COMBINATION

    Implanted pile: Precast pile with a certain combination of prestressed high strength concrete knot diversion pile (PHDC), prestressed reinforced high strength concrete pile (PRHC), prestressed high-intensity concrete pile (PHC), etc.

    1. According to the geological conditions, select the appropriate pile type to increase

    lateral and pile tip resistance.

    2. Improve the resistance level and uplift bearing capacity of pile body

    3. Prestressed high strength concrete knot pile (High-performance concrete implanted pile) (For short: PHDC)

    Prestressed high-performance concrete pile with hot rolled ribbed steel bar.

    The lateral resistance of the pile can be greatly increased through the interlocking between the pile and the surrounding area

    The resistance characteristics of pile tip can be improved by underside extension.

    4. Prestressed reinforced high strength concrete pile (For short: PRHC)

    Prestressed reinforcement, non-prestressed reinforcement, End plate anchorage

    The pile is using for upper segment pile of pile foundation, it can meet the high requirements of resistant compression, pulling and horizontal load.

    Can partly replace steel pipe pile

    EQUIPMENT TECHNOLOGY ADVANTAGES

    With accumulated technology advantages of deep soil mixing drill, SEMW completely

    independent research and develop SDP Series Pre-bored Pre-cast Piling Equipment, a

    new generation of drilling equipment which is suitable for the static drilling method.

    The main parts are international famous brands, which have the characteristics of high torque, great drilling depth, high scientific and technological content, good reliability, high construction efficiency, and the performance reaches the international advanced level.

    1. SEMW SDP Series adopts the advanced oil pressure root-enlarging technology, the

    root diameter is 1~1.6 times of the diameter of drilling hole and the root height is 3

    times of the drilling hole’s diameter. In addition, advanced slave computer software

    history data recording method is adopted to record various construction process

    data of the same kind of imported products, such as borehole depth change, drilling

    speed, construction process current, temperature condition water flow of borehole,

    root-enlarging monitoring, amount of cement injected around pile tip etc. Setting

    and storage of relevant construction data, such as construction unit, site number, pile

    number, completion status, etc., can also be used to analyze various construction data

    and form corresponding data curves.

    2. Intelligent construction management software is adopted to control the use of intelligent touch screen mode to monitor the construction process in real time. Ensure the construction quality and all construction data are clearly reflected on the display and stored automatically, which can be printed out.

    3. The SEMW SDP Series operating system is equipped with the power loss 380V automatic shutdown program. It ensures that the data will not be lost due to the crash or power failure during the operation of the drill.

    4. The SEMW SDP Series motor start mode adopts soft start. The soft starter itself has various motor protection functions, such as under-voltage, missing phase, phase sequence, overload, etc. Besides, it has good cooling function and can be started frequently.

    5. The technology of hydraulic root-enlarging has reliable performance and adopts excellent hydraulic components to ensure the normal operation of hydraulic root-enlarging under depth of 80m. Drilling tools are specially designed and manufactured with high strength, good bending and high wear resistance to reduce the maintenance costs.

    Product Model: SDP 110H 150H 220

    Specifications:

    Item

    Unit

    SDP110H

    SDP150H

    SDP220

    Max. drilling diameter

    mm

    Φ650(1040)/Φ750(1200)/Φ900(1440)

    Rated speed of shaft

    r/min

    19.1/9.5

    13.8 (8P)

    Rated torque of shaft

    KN.m

    55/110

    75/150

    110/220

    Basic length of shaft

    m

    3、4、6、9

    Rated power of motor

    KW

    110(55×2)

    150(75×2)

    220(110×2)

    Distance of Rod Center to Guide Center

    mm

    1000

    920

    Distance of Pulley Center to Guide Center

    mm

    655、800

    Center distance between guides

    mm

    600XΦ102

    Diameter of wire rope

    mm

    Φ22

    Number of sheaves

    pcs

    6

    Cement system pressure

    Mpa

    2.5

    Hydraulic system pressure

    Mpa

    18

    Joint for water and cement hose

     

    Rc11⁄2

    R1 2

    Operating control

     

    CAN-BUS、Electrical Control

    Electrical Control

    Power unit max. weight

    t

    About 8.4

    About 8.5

    About 12

    Supporting piling rig

     

    Same standard as SEMW

    SPR115/ JB160A

    Same standard as SEMW

    SPR135/ JB180

    Same standard as SEMW

    SPR135/ JB180

               

    Note: Specifications are subjected to change without prior notice.

    Application:

    1.Applicable to various seismic fortification intensity areas, adapt to the pile diameter: 500-1200mm

    2.Clay, silt, sandy soil, filled soil, broken stones (gravel) soil and complicated geological situation, mezzanine much larger changes, uneven weathering, hard and soft rock strata, maximum depth: 90m

    3.When the building site is adjacent to a building (structure) or underground pipeline and other engineering facilities, other pile type will bring bad effects.

    4.Large changeable of pile end bearing layer top elevation, the length of the pile is difficult to accurately determine, the on-site pouring construction site does not have the coagulation soil conditions or pouring concrete is not easy to ensure quality.

    5.Discharge of large amounts of mud is limited.

    6.Single pile bearing capacity is required and technical and economic indexes and construction conditions are superior to other piles.

    XIANGSHAN JINDU GARDEN

    Commercial and residential buildings, both 17 floors, have one-layer basement, the excavation depth is about 5 meters. The total land area is 17833.7m2, the total building area is 5292m2. Pile type: PHC 5 0 0AB (10 0)+PH DC 5 5 0-4 0 0AB (9 5 ), pile length32-39m, characteristic value of load bearing capacity of single pile 1500KN; Pile type: PHC600AB(110)+PHDC650-500AB(100), pile length 32-39m, characteristic value of load bearing capacity of single pile 1800KN.

    NINGBO MINGZHOU BIOMASS POWER PLANT

    The project is located in maoshan, jiangshan town, yinzhou district, Ningbo.The maximum single column load is 1100KN (EXCEPT MAIN WORKSHOP) is 1100KN, the maximum single column load is 4000-5500KN. Pile type PHC600AB(110)+PHDC650-500(125)AB, pile length is 54m, the bearing layer of pile foundation is 5 layers round gravel with silty clay. Characteristic value of load bearing capacity of single pile is 1600KN.

    WENZHOU POWER PLANT

    The construction scale of the project is 2 x 600MW. The turbine building is 32m high, total load is 20000KN, chimney is 240m high, peak load is 220000KN. Bunker room’s load is 25000KN. The bearing layer of pile foundation is (7) gravel (egg) stone layer, pile length is 56-59m. Pile type is PRHC800(130) +PHC800AB (130) +PHDC800-600(130) AB, characteristic value of load bearing capacity of single pile is 5500KN. Pile type is PRHC

    600(130) +PHC600AB (130) +PHDC650-500(125) AB, characteristic value of load bearing capacity of single pile is 4050KN.

    Service:

    1.FREE-CALL CENTER SERVICE

    We provide free-call center service for 24hours. For further information of SEMW products or after-sale service, please call us at+0086-21-4008881749. We will provide information or solutions you need.

    2.CONSULTANCY & SOLUTIONS

    Our professional team offers free consulting services according to different job sites, soil conditions and your requirements.

    3.TESTING & TRAINING

    SEMW is committed to free guidance of installation and testing, to make sure that you can make proper operations.

    We will offer training on site if it is necessary, to make sure you know the correct

    way for maintenance, analysis and debugging of the malfunctions.

    4.MAINTENANCE & REPAIR

    We have offices in many places in China, easy for maintenance.

    Sufficient supplies for spare parts and wearing parts.

    Our service team has a wide range of professional experience on any size project

    large or small. They provide best solutions with quick response.

    5.CUSTOMERS & CONNECTIONS

    After-sale customer file was set up for better understanding your need and feedback.

    More services are provided, such as, sending info of new released products, latest

    technology. We also provide special offer for you.

    THE GLOBAL MARKETING NETWORK

    Diesel Hammers are the key product of SEMW. They have achieved a good reputation domestically and overseas. SEMW diesel hammers are exported in a large quantity to Europe, Russia, Southeast Asia, North America, South America, and Africa.


  • Previous:
  • Next:

  • Related Products