한국어
中文
SEMW D8-42 Tubular Diesel Pile Hammer
The SEMW D8-42 Diesel Pile Hammer is a compact tubular impact hammer for driven pile installation in suitable foundation engineering conditions. Its 800 kg impact piston and maximum impact energy of 23,940 J per blow provide a defined specification for contractors evaluating smaller-capacity diesel pile driving equipment.
As part of the SEMW D Series, the D8-42 is designed for guided impact pile driving with compatible leads, pile caps and lifting equipment. Pile type, driving resistance and hammer configuration should be checked against each project's ground conditions.
Designed for Controlled, Guided Pile Driving
Tubular Diesel Impact System
The diesel impact mechanism delivers successive hammer blows to a driven pile through an appropriate impact block, pile cap and cushion arrangement. Driveability must be evaluated against pile material and soil resistance.
Compact D8 Configuration
The D8-42 combines a 4,954 mm approximate hammer length with a 1,950 kg approximate hammer weight, making machine geometry and lifting requirements important considerations during site planning.
Leader and Guide Compatibility
Guide-jaw connection dimensions and an allowable tripping-device rope diameter of Ø20 mm provide reference points when specifying the associated guide and hoisting equipment.
Service and Daily Operation
Separate diesel and lubrication systems provide specified consumption and tank-capacity values for operating plans, routine checks and consumables management.
D8-42 Technical Specifications
| Impact piston weight | 800 kg |
|---|---|
| Impact energy per blow | ≤ 23,940 J |
| Blow frequency | ≥ 38 blows/min |
| Maximum explosion pressure force | 505 kN |
| Maximum rope diameter for tripping device | Ø20 mm |
| Diesel consumption | 4 L/h |
| Lubricant consumption | 1 L/h |
| Diesel tank capacity | 20 L |
| Lubricant tank capacity | 6 L |
| Approximate hammer weight | 1,950 kg |
| Approximate overall hammer length | 4,954 mm |
| Impact block outside diameter | 350 mm |
| Overall width over guide-jaw screws | 560 mm |
| Hammer width | 410 mm |
| Guide-jaw connection width | 320 mm |
Impact energy, blow count and consumption are operating specifications and may vary with pile resistance and jobsite conditions. Final configuration and permissible installation conditions should be confirmed during selection.
Hammer Geometry and Guide Arrangement
The technical layout illustrates the tubular hammer structure and principal dimensional references used for coordination with the leader, tripping device and pile cap assembly.
Foundation Applications and Equipment Selection
The D8-42 can be evaluated for driven pile foundations in building, industrial and civil infrastructure works where its impact energy and installation arrangement are appropriate. Suitability for a given concrete, steel or timber pile must be confirmed through project-specific selection.
Selection Inputs
- Pile type, cross-section, length and structural stress limits
- Soil profile, anticipated penetration resistance and required final set
- Available leader, lifting and hammer guide arrangement
- Pile cap, cushion and protection of the pile head
Jobsite Planning
- Review vibration and noise restrictions near sensitive structures
- Evaluate blow count and driving stresses through appropriate analysis
- Confirm maintenance access, fuel supply and lubrication routines
- Establish inspection and driving-record requirements
SEMW D Series Engineering Experience
SEMW's D Series diesel hammer range has been deployed in a variety of domestic and international foundation construction settings. The images below show the broader D Series equipment portfolio and technology features; individual photographs should not be interpreted as confirmed D8-42 installations.
D8-42 Diesel Pile Hammer FAQ
What is the impact energy of the SEMW D8-42 diesel hammer?
The D8-42 has a specified impact energy of up to 23,940 J per blow and uses an 800 kg impact piston.
How fast does the D8-42 operate?
The specified blow frequency is at least 38 blows per minute. Actual operating performance depends on pile resistance and site conditions.
What is the approximate weight of the D8-42 hammer?
The approximate diesel hammer weight is 1,950 kg, excluding the separately specified auxiliary components such as the tripping device and transport accessories.
Can the D8-42 be used for concrete or steel piles?
Compatibility depends on the pile section, required capacity, ground conditions and pile cap and leader arrangement. SEMW can help review the proposed setup before equipment selection.
Request D8-42 Configuration Guidance
For equipment selection, please provide the pile type and dimensions, project location, ground investigation results, expected driving depth and available leader arrangement. SEMW can review these requirements and discuss a suitable pile-driving configuration.
